Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric Watch Administrator's Gui - Page 66
thConfig command
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
6 thConfig command Table 11 provides default settings for areas in the End-to-End Performance Monitor class. TABLE 11 Area End-to-End Performance Monitor class default settings Description Default threshold settings Default alarm settings Threshold state End-to-end receive performance (RX performance) End-to-end transmit performance (TX performance) Monitors the receiving traffic between a SID_DID pair in a port Unit: KBps Time Base: none Low: 0 High: 0 Buffer: 0 Monitors the transmit traffic between a SID_DID pair in a port Unit: KBps Time Base: none Low: 0 High: 0 Buffer: 0 Below: 0 Above: 0 Below: 0 Above: 0 Informative Informative Informative Informative thConfig command You can use the thConfig command to customize event monitoring thresholds for the Fabric, Security, SFP, and Performance classes or to display the configuration. It is recommended, however, that you use the default settings for these classes. If configured areas exceed the currently-effective threshold settings, the Fabric Watch daemon can take one of the following actions: • Send an SNMP alarm. • Log a RASlog message. • Send an e-mail alert. For complete information about using the thConfig command, refer to the Fabric OS Command Reference Manual. 46 Fabric Watch Administrator's Guide 53-1002752-01