Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric Watch Administrator's Gui - Page 33
Fabric Watch Thresholds, In this Threshold values
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Fabric Watch Thresholds Chapter 2 In this chapter •Threshold values 13 •Time bases 16 •Threshold triggers 14 •Fabric Watch alarm behavior 17 Threshold values High and low threshold values are the values at which potential problems might occur. For example, in configuring a temperature threshold, you can select the temperatures at which a potential problem can occur because of overheating or freezing. With Fabric Watch v6.4 and later, the concept of high and low thresholds have been expanded to include four threshold categories, listed below. There are two setting types (the threshold and the above and below trigger) for four configuration possibilities. A combination of these settings can cause the following actions to occur: • Above high threshold-Fabric Watch takes this action when the current value is above the high threshold. • Below high threshold-Fabric Watch takes this action when the current value is between the high and low threshold. This replaces the previous "in-between" action, which no longer exists. • Above low threshold-This action is only applicable to port classes (physical port, FOP_Port, FCU_Port, and VE_Port). Fabric Watch takes this action when the current value crosses the low threshold towards the high threshold. • Below low threshold-Fabric Watch takes this action when the current value is below the low threshold. NOTE The above low threshold action applies only to the portThConfig command. It does not apply to the thConfig and sysMonitor commands. Fabric Watch Administrator's Guide 13 53-1002752-01