Epson PowerLite 84 User's Guide - Page 19
Using the Direct Power On Function, warning - projector lamp
View all Epson PowerLite 84 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Press the Ppower button on the remote control or on top of the projector. The projector beeps once and the Ppower light flashes green as the projector warms up, then an image begins to appear. When the Ppower light stops flashing and remains green, the projector is ready for use. 4. If you are prompted to enter a password, see page 69. warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children. Using the Direct Power On Function The Direct Power On function enables faster setup. The projector will start up automatically when you plug it in; you won't have to press the Ppower button. Follow these steps to enable Direct Power On: 1. Press the Menu button on the remote control and select the Extended menu. 2. Choose Operation and press Enter. 3. Choose Direct Power On and press Enter. note If a power outage occurs when Direct Power On is enabled and the projector is plugged in, the projector will restart when the power is restored. 4. Highlight On and press Enter. 5. Press Esc or Menu to exit. The setting will take effect the next time you plug in the projector. Displaying and Adjusting the Image 19