HP 1250 User Guide - Page 20
Case A: Separate fax line (no voice calls received), Back view of the HP Fax
UPC - 882780494893
View all HP 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
For additional fax setup information, in specific countries/regions, see the Fax Configuration website listed below. Austria Germany Switzerland (French) Switzerland (German) United Kingdom www.hp.com/at/faxconfig www.hp.com/de/faxconfig www.hp.com/ch/fr/faxconfig www.hp.com/ch/de/faxconfig www.hp.com/uk/faxconfig Case A: Separate fax line (no voice calls received) If you have a separate phone line on which you receive no voice calls, and you have no other equipment connected on this phone line, set up the HP Fax as described in this section. Finish setup Back view of the HP Fax 1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP Fax to connect to the "1-LINE" port To set up the HP Fax with a separate fax line 1. Using the phone cord supplied in the box with the HP Fax, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP Fax. Note If you do not use the supplied cord to connect from the telephone wall jack to the HP Fax, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 2. Set the Answer Mode to Fax. 3. (Optional) Change the Rings to Answer setting to the lowest setting (two rings). 4. Run a fax test. User Guide 17