HP 1250 User Guide - Page 25
Case G: Fax line shared with computer dial-up modem (no voice calls received), Back view of the HP Fax
UPC - 882780494893
View all HP 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 3 Case F: Shared voice/fax line with voice mail If you receive both voice calls and fax calls at the same phone number, and you also subscribe to a voice mail service through your telephone company, set up the HP Fax as described in this section. Note You cannot receive faxes automatically if you have a voice mail service at the same phone number you use for fax calls. You must receive faxes manually; this means you must be available to respond in person to incoming fax calls. If you want to receive faxes automatically instead, contact your telephone company to subscribe to a distinctive ring service, or to obtain a separate phone line for faxing. Finish setup Back view of the HP Fax 1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP Fax to connect to the "1-LINE" port To set up the HP Fax with voice mail 1. Using the phone cord supplied in the box with the HP Fax, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP Fax. Note If you do not use the supplied cord to connect from the telephone wall jack to the HP Fax, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 2. Set the Answer Mode to Tel. 3. Run a fax test. You must be available to respond in person to incoming fax calls, or the HP Fax cannot receive faxes. Case G: Fax line shared with computer dial-up modem (no voice calls received) If you have a fax line on which you receive no voice calls, and you also have a computer dial-up modem connected on this line, set up the HP Fax as described in this section. 22 HP Fax 1250 series