Home » HP Manuals » Fax Machines » HP 1250 » Manual Viewer

HP 1250 User Guide - Page 98

Notice to users in Japan, Notice to users in the European Economic Area

UPC - 882780494893

Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution might be particularly important in rural areas. Note The REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface might consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. The REN for this product is 0.1B, based on FCC Part 68 test results. Notice to users in Japan VCCI-2 Technical information Notice to users in the European Economic Area This product is designed to be connected to the analog Switched Telecommunication Networks (PSTN) of the European Economic Area (EEA) countries/regions. Network compatibility depends on customer selected settings, which must be reset to use the equipment on a telephone network in a country/region other than where the product was purchased. Contact the vendor or Hewlett-Packard Company if additional product support is necessary. This equipment has been certified by the manufacturer in accordance with Directive 1999/5/EC (annex II) for Pan-European single-terminal connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. User Guide 95

Section	Page
Contents	4
HP Fax overview	6
The HP Fax at a glance	6
Control panel features	7
Menu overview	8
Copy Menu	9
Fax Menu	9
Setup Menu	9
Text and symbols	9
Enter text using the keypad on the control panel	10
Available symbols for dialing fax numbers	10
Find more information	12
Sources of information	12
Finish setting up the HP Fax	14
Set your preferences	14
Set your language and country/region	14
Set the date and time	14
Adjust the volume	15
Fax setup	15
Set up the HP Fax for faxing	16
Choose the correct fax setup for your home or office	16
Select your fax setup case	18
Case A: Separate fax line (no voice calls received)	20
Case B: Set up the HP Fax with DSL	21
Case C: Set up the HP Fax with a PBX phone system or an ISDN line	22
Case D: Fax with a distinctive ring service on the same line	22
Case E: Shared voice/fax line	23
Case F: Shared voice/fax line with voice mail	24
Case G: Fax line shared with computer dial-up modem (no voice calls received)	25
Case H: Shared voice/fax line with computer dial-up modem	26
Case I: Shared voice/fax line with answering machine	28
Case J: Shared voice/fax line with computer dial-up modem and answering machine	30
Case K: Shared voice/fax line with computer dial-up modem and voice mail	32
Change settings on the HP Fax to receive faxes	34
Set the answer mode	34
Set the number of rings before answering	34
Change the answer ring pattern for distinctive ringing	35
Test your fax setup	36
Set the fax header	36
Load originals and load paper	38
Load originals	38
Choose papers for copying	39
Recommended papers for copying	39
Papers to avoid	39
Load full-size paper	40
Avoid paper jams	41
Use the fax features	44
Send a fax	44
Send a basic fax	44
Send a fax manually	45
Send a fax using monitor dialing	46
Receive a fax	47
Receive a fax manually	47
Set up backup fax reception	48
Reprint received faxes from memory	48
Forward faxes to another number	49
Block junk fax numbers	50
Set the junk fax mode	50
Add numbers to the junk fax list	50
Remove numbers from the junk fax list	51
Print reports	52
Print fax confirmation reports	52
Print fax error reports	52
Stop faxing	53
Use the copy features	54
Make a copy	54
Change the copy settings	54
Stop copying	55
Maintain the HP Fax	56
Clean the HP Fax	56
Clean the glass strip	56
Clean the white strip	57
Clean the exterior	58
Print a self-test report	59
Work with print cartridges	59
Handle the print cartridges	60
Replace the print cartridges	60
Align the print cartridges	63
Clean the print cartridges	64
Clean the print cartridge contacts	64
Order supplies	66
Order paper, or other media	66
Order print cartridges	66
Order other supplies	66
Troubleshooting information	68
Setup troubleshooting	68
Hardware setup troubleshooting	68
Fax setup troubleshooting	71
The fax test failed	71
Operational troubleshooting	82
Paper troubleshooting	82
Clear paper jams	82
Print cartridge troubleshooting	85
HP warranty and support	86
Warranty	86
Warranty upgrades	86
Warranty information	87
Get support and other information from the Internet	88
Before you call HP customer support	88
Access your serial number and service ID	88
Call in North America during warranty	89
Prepare the HP Fax for shipment	89
Remove the print cartridges before shipment	89
Remove the control panel faceplate	90
Pack the HP Fax	90
Technical information	92
Paper specifications	92
Paper tray capacities	92
Paper sizes	92
Copy specifications	93
Fax specifications	93
Physical specifications	94
Power specifications	94
Environmental specifications	94
Memory specifications	94
Environmental product stewardship program	94
Protecting the environment	94
Ozone production	94
Energy consumption	95
Paper use	95
Plastics	95
Material safety data sheets	95
Hardware recycling program	95
HP inkjet supplies recycling program	95
Disposal of Waste Equipment by Users in Private Households in the European Union	95
Regulatory notices	96
Regulatory model identification number	96
Notice to users of the U.S. telephone network: FCC requirements	96
FCC statement	97
Note à l’attention des utilisateurs du réseau téléphonique canadien/notice to users of the Canadian ...	97
Notice to users in Japan	98
Notice to users in the European Economic Area	98
Notice to users of the German telephone network	99
Geräuschemission	99
Notice to users in Korea	99
Declaration of conformity (European Economic Area)	99
HP Fax 1250 series declaration of conformity	100

Match case Limit results 1 per page

This equipment meets the applicable Industry Canada Terminal Equipment Technical

Specifications. This is confirmed by the registration number. The abbreviation IC before the

registration number signifies that registration was performed based on a Declaration of

Conformity indicating that Industry Canada technical specifications were met. It does not imply

that Industry Canada approved the equipment.

Users should ensure for their own protection that the electrical ground connections of the power

utility, telephone lines and internal metallic water pipe system, if present, are connected together.

This precaution might be particularly important in rural areas.

Note

The REN assigned to each terminal device provides an indication of the

maximum number of terminals allowed to be connected to a telephone interface. The

termination on an interface might consist of any combination of devices subject only to

the requirement that the sum of the Ringer Equivalence Numbers of all the devices does

not exceed 5.

The REN for this product is 0.1B, based on FCC Part 68 test results.

Notice to users in Japan

VCCI-2

Notice to users in the European Economic Area

This product is designed to be connected to the analog Switched Telecommunication Networks

(PSTN) of the European Economic Area (EEA) countries/regions.

Network compatibility depends on customer selected settings, which must be reset to use the

equipment on a telephone network in a country/region other than where the product was

purchased. Contact the vendor or Hewlett-Packard Company if additional product support is

necessary.

This equipment has been certified by the manufacturer in accordance with Directive 1999/5/EC

(annex II) for Pan-European single-terminal connection to the public switched telephone network

(PSTN). However, due to differences between the individual PSTNs provided in different

countries, the approval does not, of itself, give an unconditional assurance of successful

operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first instance.

User Guide

Technical information