HP 2420 Service Manual - Page 128
Access plate,
UPC - 829160289205
View all HP 2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Access plate 1. Remove the back cover (see Back cover), the I/O cover (see I/O cover), and the duplexer inlet guide (see Figure 6-20. Removing the fuser (2 of 5)). 2. Press the green lever in the tray 2 cavity to release the access plate at the front of the printer. 3. At the back of the printer, release the access plate from one tab (callout 1) at the left, inside, of the printer. Figure 6-35. Removing the access plate 4. Lower the pan until the other side of the pan slides off of the other tab (callout 2). 5. Slide the pan out of the printer. 114 Chapter 6 Removal and replacement ENWW
Access plate
1.
Remove the back cover (see
Back
cover
), the I/O cover (see
I/O
cover
), and the
duplexer inlet guide (see
Figure
6-20.
Removing
the
fuser
(2
of
5)
).
2.
Press the green lever in the tray 2 cavity to release the access plate at the front of the
printer.
3.
At the back of the printer, release the access plate from one tab (callout 1) at the left,
inside, of the printer.
Figure 6-35.
Removing the access plate
4.
Lower the pan until the other side of the pan slides off of the other tab (callout 2).
5.
Slide the pan out of the printer.
114
Chapter 6
Removal and replacement
ENWW