HP 2420 Service Manual - Page 129
Power supply,
UPC - 829160289205
View all HP 2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Power supply 1. Remove all of the covers (see Covers). 2. Remove the control panel (see Control panel). 3. Remove the formatter (see Formatter). 4. Remove the right handle (see Right-side handle). 5. Remove the ECU (see ECU). 6. Remove the duplexer pan (see Access plate). 7. Tip the printer so that it rests on its front. 8. At the bottom of the printer, remove the two screws (callout 1) that secure the oblique- roller assembly to the printer, and then lift the assembly from the printer. Figure 6-36. Removing the power supply (1 of 5) ENWW Power supply 115
Power supply
1.
Remove all of the covers (see
Covers
).
2.
Remove the control panel (see
Control
panel
).
3.
Remove the formatter (see
Formatter
).
4.
Remove the right handle (see
Right-side
handle
).
5.
Remove the ECU (see
ECU
).
6.
Remove the duplexer pan (see
Access
plate
).
7.
Tip the printer so that it rests on its front.
8.
At the bottom of the printer, remove the two screws (callout 1) that secure the oblique-
roller assembly to the printer, and then lift the assembly from the printer.
Figure 6-36.
Removing the power supply (1 of 5)
ENWW
Power supply
115