HP 4150 HP OmniBook 4150 - Reference Guide - Page 16
Setting Up for the First Time
UPC - 725184276088
View all HP 4150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Introducing the OmniBook Setting Up for the First Time Setting Up for the First Time When you set up the OmniBook for the first time, you'll need to install and charge the battery, connect the ac adapter, turn on the OmniBook, and go through the Windows setup program. CAUTION To set up the OmniBook and Windows Use only the HP adapter model F1454A (or other approved adapter) with this product. Using any other ac adapter could damage the OmniBook and may void your warranty. Refer to the warranty statement for your product. 1. If present, remove the "weight-saving" module by sliding the release latch forward, then pushing it back as far as it will go. With the latch open, insert the OmniBook's main battery. 2. Plug in the ac adapter. 3. Connect the ac adapter to the OmniBook's right side, as shown. The OmniBook battery starts charging. Let the battery charge a full 24 hours to completely charge the internal clock battery. Otherwise, the OmniBook may not keep the correct date and time. 4. Press the blue power button. 16 Reference Guide