HP 5200tn HP LaserJet 5200 Series Printer - User Guide - Page 144
Load Tray X <type> <size>, 5 Unexpected Type In Tray X
UPC - 882780123762
View all HP 5200tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Control panel message 40 EIO X BAD TRANSMISSION alternates with To continue press Description A connection with the card in the EIO slot has broken. 40 EMBEDDED I/0 BAD TRANSMISSION alternates with The connection with the HP Jetdirect embedded print server has broken. To continue press 41.3 UNEXPECTED SIZE IN TRAY X alternates with LOAD TRAY X Media is loaded that is longer or shorter in the feed direction than the size configured for the tray. 41.5 UNEXPECTED TYPE IN TRAY X alternates with LOAD TRAY X The printer senses a different media type than what is configured in the tray. 41.X ERROR alternates with To continue press A printer error has occurred. 49.XXXXX ERROR alternates with To continue turn off then on 50.X FUSER ERROR For help press A critical firmware error has occurred. A fuser error has occurred. 51.XY ERROR alternates with To continue turn off then on A printer error has occurred. Recommended action 1. Press to continue printing. NOTE Data will be lost. 2. If the message persists, contact HP Support. Press to continue printing. 1. Press to print from a different tray. 2. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again. See Configuring trays for more information. 1. Press to print from a different tray. 2. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again. See Configuring trays for more information. 1. Press to continue or press for more information. 2. If the message persists after exiting help, turn the printer off and then on. 3. If the message persists, contact HP Support. 1. Turn the printer off and then on. 2. If the message persists, contact HP Support. 1. Turn the printer off. 2. Verify the fuser is installed correctly and fully seated. 3. Turn on the printer. 4. If the message persists, contact HP Support. 1. Press to continue. 2. If the message persists, turn the printer off and then on. 3. If the message persists, contact HP Support. 130 Chapter 7 Problem solving ENWW