HP 5200tn HP LaserJet 5200 Series Printer - User Guide - Page 177

Blurred print, Random image repetition, CON DEVICE, PRINT QUALITY, TONER DENSITY, OPTIMIZE

Page 177 highlights

Blurred print 1. Make sure that the type and quality of the media you are using meet HP specifications. (See Paper specifications.) 2. Make sure that the environmental specifications for the printer are being met. (See Operating environment.) 3. Turn over the stack in the tray. Also, try rotating the stack 180°. 4. Do not use media that already has been run through the printer. 5. Decrease the toner density. Open the CONFIGURE DEVICE menu at the printer control panel. Open the PRINT QUALITY submenu and change the TONER DENSITY setting. (See Print Quality submenu.) 6. Open the CONFIGURE DEVICE menu at the printer control panel. On the PRINT QUALITY submenu, open OPTIMIZE and set HIGH TRANSFER=ON. (See Print Quality submenu.) Random image repetition If an image that appears at the top of the page (in solid black) repeats further down the page (in a gray field), the toner might not have been completely erased from the last job. (The repeated image might be lighter or darker than the field it appears in.) ● Change the tone (darkness) of the field that the repeated image appears in. ● Change the order in which the images are printed. For example, have the lighter image at the top of the page, and the darker image farther down the page. ENWW Troubleshooting print-quality problems 163

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248

Blurred print
1.
Make sure that the type and quality of the media you are using meet HP specifications. (See
Paper
specifications
.)
2.
Make sure that the environmental specifications for the printer are being met. (See
Operating
environment
.)
3.
Turn over the stack in the tray. Also, try rotating the stack 180°.
4.
Do not use media that already has been run through the printer.
5.
Decrease the toner density. Open the
CONFIGURE DEVICE
menu at the printer control panel.
Open the
PRINT QUALITY
submenu and change the
TONER DENSITY
setting. (See
Print
Quality
submenu
.)
6.
Open the
CONFIGURE DEVICE
menu at the printer control panel. On the
PRINT QUALITY
submenu, open
OPTIMIZE
and set
HIGH TRANSFER=ON
. (See
Print
Quality
submenu
.)
Random image repetition
If an image that appears at the top of the page (in solid black) repeats further down the page (in a
gray field), the toner might not have been completely erased from the last job. (The repeated image
might be lighter or darker than the field it appears in.)
Change the tone (darkness) of the field that the repeated image appears in.
Change the order in which the images are printed. For example, have the lighter image at the
top of the page, and the darker image farther down the page.
ENWW
Troubleshooting print-quality problems
163