HP 5200tn HP LaserJet 5200 Series Printer - User Guide - Page 59
Auto continue, Cartridge low, CON DEVICE, SYSTEM SETUP, CONTINUE
UPC - 882780123762
View all HP 5200tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5. Press or to select the appropriate setting, and then press . 6. Press Menu to exit the menu. Auto continue You can determine printer behavior when the system generates an auto-continuable error. ON is the default setting. ● Select ON if you want an error message to appear for 10 seconds before the printer automatically continues to print. ● Select OFF to pause printing any time an error message appears and until you press . To set auto continue 1. Press Menu to open the menus. 2. Press to highlight CONFIGURE DEVICE, and then press . 3. Press to highlight SYSTEM SETUP, and then press . 4. Press to highlight AUTO CONTINUE, and then press . 5. Press or to select the appropriate setting, and then press . 6. Press Menu to exit the menu. Cartridge low The printer has two options for reporting that print-cartridge life is low: CONTINUE is the default value. ● Select CONTINUE to allow the printer to continue printing while a warning appears and until the print cartridge is replaced. ● Select STOP if you want the printer to pause printing until you replace the used print cartridge or press , which allows the printer to print while the warning appears. To set supplies-low reporting 1. Press Menu to open the menus. 2. Press to highlight CONFIGURE DEVICE, and then press . 3. Press to highlight SYSTEM SETUP, and then press . 4. Press to highlight CARTRIDGE LOW, and then press . 5. Press or to select the appropriate setting, and then press . 6. Press Menu to exit the menu. ENWW Changing printer-control-panel configuration settings 45