HP 5200tn HP LaserJet 5200 Series Printer - User Guide - Page 43
Con Device menu, Printing submenu
UPC - 882780123762
View all HP 5200tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Configure Device menu This menu contains administrative functions. The CONFIGURE DEVICE menu allows the user to change the default printing settings, adjust the print quality, and change the system configuration and I/O options. Printing submenu Some items on this menu are available in the program or printer driver (if the appropriate driver is installed). Program and printer-driver settings override control-panel settings. In general, it is better to change these settings in the printer driver, if applicable. Item COPIES DEFAULT PAPER SIZE DEFAULT CUSTOM PAPER SIZE DUPLEX DUPLEX BINDING OVERRIDE A4/LETTER Values 1 to 32000 Displays a list of available media sizes. UNIT OF MEASURE X DIMENSION Y DIMENSION OFF ON LONG EDGE SHORT EDGE NO Explanation Sets the default number of copies by selecting any number from 1 to 32000. Use or to select the number of copies. This setting applies only to print jobs that do not have the number of copies specified in the program or printer driver, such as a UNIX or Linux program. The default setting is 1. NOTE It is best to set the number of copies in the program or printer driver. (Program and printer-driver settings override control-panel settings.) Sets the default image size for paper and envelopes. This setting applies to the print jobs that do not have a paper size specified in the program or printer driver. The default setting is LETTER. Sets the default custom paper size for tray 1. This menu appears only if the media-size switch in the selected tray is set to CUSTOM. UNIT OF MEASURE: Use this option to select the unit of measure (INCHES or MILLIMETERS) to use when you set customer paper sizes for the tray 1. X DIMENSION: Use this item to set the measurement of the width of the paper (measurement from side to side in the tray). The options are 3.0 to 12.28 INCHES or 76 to 312 MM. Y DIMENSION: Use this item to set the measurement of the length of the paper (measurement from front to back in the tray). The options are 5.0 to 18.50 INCHES or 127 to 470 MM. Appears only for printers that include a built-in duplexer. Set the value to ON to print on both sides (duplex) or OFF to print on one side (simplex) of a sheet of paper. The default setting is OFF. Changes the binding edge for duplex printing. The menu item appears only if the printer includes a built-in duplexer and DUPLEX=ON. The default setting is LONG EDGE. Allows the printer to print an A4-size job on letter-size paper if A4-size paper is not loaded in the printer (or vice versa). ENWW Configure Device menu 29