HP Brio ba200 hp brio ba200, user guide - Page 53
Replacing the Cover
View all HP Brio ba200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Removing and Replacing the Cover Replacing the Cover 1 Pull the bottom edges of the PC cover apart slightly. 2 Lower the cover onto the PC, leaving a gap of about 1cm (0.3 inches) between the cover and the front of the PC. 3 Check that the cover is correctly held in place with the metal tabs positioned inside the guide rails. 4 Slide the cover towards the front of the PC. 5 Tighten the three screws on the back of the computer. 47
47
Removing and Replacing the Cover
Replacing the Cover
1
Pull the bottom edges of the PC cover apart slightly.
2
Lower the cover onto the PC, leaving a gap of about 1cm (0.3 inches) between the
cover and the front of the PC.
3
Check that the cover is correctly held in place with the metal tabs positioned inside
the guide rails.
4
Slide the cover towards the front of the PC.
5
Tighten the three screws on the back of the computer.