HP Brio ba200 hp brio ba200, user guide - Page 56
Replacing the Side Panel
View all HP Brio ba200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Accessing or Replacing the System Board Replacing the Side Panel 1 Replace the side panel in the PC. Align the panel with the metal positioning tab and engage the lower retaining tabs. 2 Rotate the top of the panel towards the PC. 3 Slide the panel towards the rear of the PC until all the retaining tabs are engaged. metal positioning tab 4 Replace the two screws that hold the panel in place. 5 Reattach the cables with the plastic clip. 6 Replace the cover. Refer to "Replacing the Cover" on page 47. 50
50
Accessing or Replacing the System Board
Replacing the Side Panel
1
Replace the side panel in the PC. Align the panel with the metal positioning tab and
engage the lower retaining tabs.
2
Rotate the top of the panel towards the PC.
3
Slide the panel towards the rear of the PC until all the retaining tabs are engaged.
4
Replace the two screws that hold the panel in place.
5
Reattach the cables with the plastic clip.
6
Replace the cover. Refer to ”Replacing the Cover” on page 47.
metal
positioning tab