HP Brio ba200 hp brio ba200, user guide - Page 86

Manually Clearing CMOS and Passwords

Get HP Brio ba200 PDF manuals and user guides View all HP Brio ba200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

Clearing Your PC's CMOS (BIOS) Settings Manually Clearing CMOS and Passwords 1 Remove the PC's cover. Refer to page 46. 2 Locate the CMOS jumper (J-6) on the system board. You may need to remove the PC's side panel to gain easier access to the jumper block page 48. 3 To clear both CMOS and password, set the Clear CMOS jumper (J-6) so that it covers the two pins on the opposite end of the jumper block. If you want to clear passwords only, locate the Clear password jumper (J-8) and set the jumper so that it covers the two pins on the opposite end of the jumper block. Replace the cover, reconnect the power cord, reboot your PC, then shut down your system before proceeding with step 4. Clear Passwords Jumper Block (J-8) Clear CMOS and Passwords Jumper Block (J-6) Clear CMOS and Passwods (J-6) Default Position Clear CMOS Clear Passwords only (J-8) Default Position Clear Passwords 4 Reset the jumper to the default position. 5 Replace the cover and reconnect the power cord. 6 Switch on the PC. 7 Press F2 to enter the Setup program. The PC will restart with the new configuration. You now have full access to the Setup program. For more information on Setup, refer to page 22. 80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
80
Clearing Your PC’s CMOS (BIOS) Settings
Manually Clearing CMOS and Passwords
1
Remove the PC’s cover. Refer to page 46.
2
Locate the CMOS jumper (J-6) on the system board. You may need to remove the
PC’s side panel to gain easier access to the jumper block page 48.
3
To clear both CMOS and password, set the Clear CMOS jumper (J-6) so that it
covers the two pins on the opposite end of the jumper block.
If you want to clear passwords only, locate the Clear password jumper (J-8) and set
the jumper so that it covers the two pins on the opposite end of the jumper block.
Replace the cover, reconnect the power cord, reboot your PC, then shut down your
system before proceeding with step 4.
4
Reset the jumper to the default position.
5
Replace the cover and reconnect the power cord.
6
Switch on the PC.
7
Press
F2
to enter the
Setup
program. The PC will restart with the new
configuration. You now have full access to the Setup program. For more
information on
Setup
, refer to page 22.
Clear CMOS and Passwod
od
od
ods (J-6)
Default Position
Clear CMOS
Clear CMOS and Passwords
Jumper Block (J-6)
Clear Passwords
Jumper Block (J-8)
Clear Pass
ss
ss
sswords only (J-8)
Default Position
Clear Passwords