HP DesignJet D5800 Using Your Printer - Page 40
HP DesignJet D5800 Manual
View all HP DesignJet D5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
8. Press the OK button on the front panel. Advance the paper using the arrows on the front panel. Make sure that the paper passes in front of the loading table, as shown. 9. Pull down the center of the paper's leading edge to straighten the paper. Do not attempt to pull more paper out of the printer. NOTE: If you are loading the take-up reel during printing you do not need to pull the paper taut. Tape the paper to the spindle core when an adequate length of paper has fed from the printer after printing begins. 10. Adjust the position of the core on the take-up reel spindle so that it is aligned with the paper. 11. Tape the leading edge of the paper to the core in the center, then at each side. Make sure that the paper is straight. 12. Press the OK button on the front panel. The printer advances the paper. 32 Chapter 4 Handle the paper ENWW