HP DesignJet D5800 Using Your Printer - Page 77
Select paper size, Custom paper sizes
View all HP DesignJet D5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
● In the driver dialog (Mac OS X Print dialog): select custom instead of standard print-quality options, then check the Max. resolution box. ● On the Embedded Web Server's Submit Job page: select Basic settings > Print quality > Custom. Set Quality level to Best, and Max. resolution to Yes. NOTE: The Max. resolution option results in slower printing with photo papers, but it does not increase the amount of ink used. Select paper size The paper size can be specified in the following ways. NOTE: The paper size specified here should be the paper size in which the document was created. It is possible to rescale the document to a different size for printing. See Rescale a print on page 70. ● In the Windows driver dialog: select the Paper/Quality tab, then select your paper size from the Document Size list. ● In the Mac OS X Page Setup dialog: select your printer in the Format for popup menu, then Paper Size. NOTE: If your application offers no Page Setup dialog, please use the Print dialog. ● On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Page size > Standard. ● Using the front panel: select the Setup menu icon , then Printing preferences > Paper options > Select paper size. NOTE: If you have set the paper size from your computer, that overrides the paper size setting in the front panel. NOTE: If you have disabled skew checking, the paper length is estimated as four times the width. TIP: If your document is 330 × 483 mm (13 × 19 in), designed to fit on sheet paper of the same size, select the document size Super B/A3. Custom paper sizes To choose a non-standard paper size not shown in the list of paper sizes: ● Under Windows, there are two different ways: ◦ In the driver dialog, press the Custom button in the Paper/Quality tab, then specify the name and the dimensions of your new paper size, then click Save to save your new paper size. In the PostScript driver, to see your new custom size in the list of custom sizes, you need to exit the printer properties, then reenter them (and use the More button if necessary). NOTE: The driver will not allow you to create a paper size whose width exceeds its length. ◦ From the Start menu, select Printers, then from the File menu select Server Properties. In the Forms tab, check the Create a new form box, specify the name and dimensions of the new form, then click Save Form. ENWW Select paper size 69