HP Integrity rx2800 HP Smart Update Manager User Guide - Page 17
HP SUM supported firmware for HP ProLiant servers, for HP Integrity BL860c/BL870c/BL890c i2 Servers.
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
IMPORTANT: Before deploying firmware updates to a target server, be sure that a recent backup of the target server is available in the event the deployment procedure fails. For more information about deploying firmware on HP ProLiant servers, see the HP Smart Update Firmware DVD User Guide on the HP website (http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManu al&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=345557). NOTE: Currently, HP SUM cannot be used to deploy firmware on HP Integrity servers except for HP Integrity BL860c/BL870c/BL890c i2 Servers. HP SUM supported firmware for HP ProLiant servers Component HP ProLiant ML/DL/SL series System ROM Supported Yes HP Workstation WS460c G6 Blade ROM Yes, offline only HP ProLiant Blade Servers ROM Yes HP ProLiant 100-series Servers ROM Yes iLO 2 firmware Yes, local and remote iLO 3 firmware3 Yes, local and remote LO-100 firmware3 Yes Broadcom NIC firmware Yes Intel® NIC firmware No QLogic NIC firmware Yes, offline only Mellanox NIC firmware Yes Power Management Controller firmware Yes Smart Array Controller firmware Yes SAS and SATA hard drive firmware behind Smart Array controllers SAS and SATA hard drive firmware behind non-Smart Array controllers Emulex, QLogic, and Brocade Fibre Channel Host Bus Adapter firmware Tape blade firmware Yes No Yes, offline only Yes Virtual Connect firmware1 Yes, online only HP StorageWorks 600 Modular Disk System (MDS600)2 Yes, offline only HP 3Gb SAS BL Switch firmware Yes, online only Onboard Administrator Firmware4 Yes, online only Introduction 17