HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 110
Make the Installation Disk if Necessary, Microsoft Windows NT Client or Server, Installation
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Chapter 9 Managing Servers Over the Network Make the Installation Disk if Necessary The files needed to install the HP NetRAID Network utilities can be found on the following utilities diskette(s) created by the HP NetServer Navigator CD-ROM: • For Microsoft Windows NT and Windows 95, there are two diskettes titled "NetRAID Assistant for Windows NT and Windows 95." • For Novell NetWare, there is one diskette titled "NetRAID Utilities for NetWare." • For Banyan VINES, there are two diskettes titled "NetRAID Utilities for Banyan VINES." If you do not have these diskettes, you can generate them using the HP NetServer Navigator CD-ROM. 1. Turn on the HP NetServer and monitor, and insert the HP NetServer Navigator CD-ROM into the drive. Turn off the HP NetServer power, wait 10 seconds, and turn it back on again. 2. Go to the HP Navigator Main Menu, and choose NetServer Utilities. 3. Select More NetServer Utilities. 4. From the NetServer Utilities menu, select Diskette Library. 5. From the Diskette Library, do the following ◊ For Windows NT, select NetRAID Assistant for Windows NT and Windows95. ◊ For NetWare, select NetRAID Utilities for NetWare. ◊ For Banyan VINES, select NetRAID Utilities for Banyan VINES. 6. Follow the onscreen instructions to create the diskette. 7. When the diskette is complete, remove the HP NetServer Navigator CD-ROM and click Exit to reboot the HP NetServer. Microsoft Windows NT Client or Server Installation Instructions For each client or server operating under Microsoft Windows NT, or for each client running under Windows 95, run Setup and then follow the on-screen instructions to install the appropriate utilities. 102