HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 117
Using HP NetRAID Assistant to Manage Servers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Chapter 9 Managing Servers Over the Network Using HP NetRAID Assistant to Manage Servers Before Starting HP NetRAID Assistant The Registration Server must be running before any other servers are started. • If the Registration Server is a NetWare server, it must be running reg_serv.nlm. • If the Registration Server is an NT server, it must be running the NetRAID Registration Server icon (under the NetRAID program group). To access an HP NetRAID Series adapter in a server from the network, the three services listed below must be running. Start them in the order listed. You may set them for automatic start, if desired. 1. NobleNet Portmapper: It should have been installed by the HP NetRAID software and set for automatic start in Windows NT and Banyan VINES. In NetWare, load rpcstart.nlm. 2. HP NetRAID Registration Server: Start it before the others by doubleclicking on its Windows icon or by loading NetWare module reg_serv.nlm. 3. HP NetRAID Access Service: Start it by double-clicking on its Windows icon or by loading NetWare module raidserv.nlm. It is set for automatic start in Banyan VINES. NOTE To change the password for a server using Windows NT, run setpass.exe under \netraid\dll\. To change the password for a server using NetWare or Banyan VINES, reinstall the HP NetRAID management software, as described in this chapter, with the new password. Start HP NetRAID Assistant Run HP NetRAID Assistant from a client or server in which the HP NetRAID Assistant utility was installed by clicking on the NetRAID Assistant icon in the NetRAID program group (or group you specified). If HP NetRAID Assistant is started on a standalone server, the main window is displayed immediately. 109