HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 118

Chapter 9 Configuration Menu Adapter Menu Physical Drive Menu Logical Drive Menu Managing Servers Over the Network Progress Help Menu Menu Server Selector Physical Drives Adapter Selector Toggle Between Views Figure 9-1. HP NetRAID Assistant Window If HP NetRAID Assistant is started on a client or server that can access HP NetRAID Series adapters over the network, you must select the server you want to access. The HP NetRAID Assistant Main window has a Server pull-down list next to the Adapter pull-down list. When you select a server from the server selector box on HP NetRAID Assistant, a window appears with the choice of access modes: Full Access and View Only. Select one. • Full Access mode requires that authorized users enter a password. The password is case-sensitive. The password must be given before full access can be established to a server, and each server can require a unique password. Full Access mode activates features that let you change the adapter configuration and the states of physical and logical drives. Use it to manage the HP NetRAID Series adapters in the server. For example, in Full Access mode, you can initiate recovery from a disk failure, or make a new hot spare. • View Only mode does not require a password, and does not permit users to change the configuration. All menu selections that would change the 110