HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 145
AHP NetRAID-3Si Specifications
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
A Adapter Specifications HP NetRAID-3Si Specifications Parameter Product Number Card Size Processor Bus Type PCI Adapter Bus Data Transfer Rate BIOS Cache Configuration Firmware Nonvolatile RAM Operating Voltage SCSI Controllers SCSI Data Transfer Rate SCSI Bus SCSI Termination Termination Disable Devices per SCSI Channel SCSI Device Types Supported SCSI Channels RAID Levels Supported SCSI Connectors Multiple Cards Battery Backup Specification D5955A 12.3" x 4.2" (full length PCI) Intel i960RD™ @ 66 MHz PCI 2.1 Custom ASIC Up to 132 MB HP NetRAID BIOS 16 MB using 60 ns EDO DRAM 1 MB flash ROM 32 KB of NVRAM for disk configuration space 5.00 V ± 0.25 V Symbios Logic 53C895 on each channel Up to 80 MB/sec with Ultra2 drives; 40 MB/sec with Ultra drives Low voltage differential or single-ended SCSI Active Automatic through cable detection 6 to 8, depending on SCSI mode and storage cabinet Low voltage differential or single-ended SCSI disk drives Three 0, 1, 3, 5,10, 30, and 50 Three 68-pin, high-density internal connectors Three 68-pin, ultra-high-density external connectors Up to six HP NetRAID Series adapters per system On-board battery backup circuitry provides up to 42 hours of data retention for 16 MB cache 137