HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 55
HP NetRAID-3Si
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 5 Installation and Configuration HP NetRAID-3Si The Battery Backup Unit is a battery pack already installed on the HP NetRAID3Si adapter. Connect it, as described below, before installing the adapter in the HP NetServer. To connect the battery pack, plug the connector on the wire in the lower-left corner into the connector at J21, as shown in Figure 5-3. The connector is keyed to make sure the proper connection is made. Figure 5-3. HP NetRAID-3Si Battery Backup Unit with the Battery Pack Connected 47
Chapter 5
Installation and Configuration
47
HP NetRAID-3Si
The Battery Backup Unit is a battery pack already installed on the HP NetRAID-
3Si adapter. Connect it, as described below, before installing the adapter in the
HP NetServer.
To connect the battery pack, plug the connector on the wire in the lower-left
corner into the connector at J21, as shown in Figure 5-3. The connector is keyed
to make sure the proper connection is made.
Figure 5-3. HP NetRAID-3Si Battery Backup Unit with the Battery Pack
Connected