HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 81
Step K., Install NOS and HP NetRAID Drivers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 6 HP NetRAID Series Software Step K. Install NOS and HP NetRAID Drivers Install Network Operating System (if necessary) If the NOS is not already installed on the HP NetServer, install it according to the instructions you printed in Step J after you created the HP NetRAID drivers diskette. Usually, the NOS is installed on a drive connected to the embedded SCSI Channel A. However, the NOS can also be installed on a disk array. Uninstall the Old Drivers (if necessary) If you have an old version of the HP NetRAID drivers installed on your system, you need to uninstall the old HP NetRAID drivers now. The table that follows lists the names of the drivers that you must uninstall. For instructions on uninstalling a driver, see the user guide for your operating system. NOTE You do not need to uninstall old drivers if your NOS is SCO UNIX or SCO UnixWare. Network Operating System Microsoft Windows NT NetWare 3.1x NetWare 4.1x NetWare ASPI Banyan VINES 6.x, 7.0 IBM OS/2 Old Drivers to Uninstall mraidnt.sys Mega3_1x.dsk Mega4_xx.ham Mega4_xx.ddi Mega4xx.dsk Mega4xx.ddi Megaspi.dsk Megaspi.ddi Driver.o mraid.add Install HP NetRAID Series Driver Load the appropriate driver as instructed in the Network Operating System Installation Instructions that you just printed in Step J earlier in this chapter. 73