HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 83
IBM OS/2 Warp Server SMP 4.0, Novell NetWare 4.11, 4.11 SMP, SFTIII 4.11, Novell NetWare 3.12
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 6 HP NetRAID Series Software IBM OS/2 Warp Server SMP 4.0 1. Open a command prompt window. 2. Change to the drive where the utility is to be installed. 3. Type cd\ and press the Enter key. 4. Type md NetRAID and press the Enter key. 5. Type cd NetRAID and press the Enter key. 6. Insert the diskette containing the HP NetRAID drivers for IBM OS/2. 7. Type copy :\netraid\*.* and press the Enter key, where is the diskette drive. 8. Type megaconf.exe from the NetRAID directory to run the HP NetRAID Config utility. Novell NetWare 4.11, 4.11 SMP, SFTIII 4.11 1. Exit to the DOS prompt. 2. Insert the diskette called "NetRAID Utilities for NetWare." 3. Type Copy :\NetRAID\*.* :\nwserver, where is the drive letter for the diskette drive and is the hard disk where NetWare is installed. Press Enter. 4. To load the HP NetRAID Config utility, type load :\nwserver\megamgr.nlm and press Enter at the NetWare command prompt. Novell NetWare 3.12 1. Exit to the DOS prompt. 2. Insert the diskette called "NetRAID Utilities for NetWare." 3. Type Copy :\NetRAID\*.* :\server.312, where is the drive letter for the diskette drive and is the hard disk where NetWare is installed. Press Enter. 4. To load the HP NetRAID Config utility, type load :\nwserver\megamgr.nlm and press Enter at the NetWare command prompt. 75