HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 129
x Logical Drives Degraded, Logical Drive Degraded, Insufficient Memory
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chapter 11 Troubleshooting x Logical Drives Degraded Problem: x number of logical drives signed on in the degraded (critical) state. Suggested solution: 1. Use a utility, such as HP NetRAID Assistant or HP NetRAID Config, to determine which physical drive(s) is not responding and thereby makes the logical drives degraded. 2. Correct the problem with the physical drive(s) by reconnecting, replacing, or rebuilding the physical drive(s). 1 Logical Drive Degraded Problem: One logical drive signed on in the degraded (critical) state. Suggested solution: 1. Use a utility, such as HP NetRAID Assistant or HP NetRAID Config, to determine which physical drive is not responding and thereby makes the logical drive degraded. 2. Correct the problem with the physical drive by reconnecting, replacing, or rebuilding it. Insufficient Memory to Run. Press any Key to Continue ... Problem: There is insufficient memory in the HP NetServer to run the HP NetRAID BIOS. Suggested solution: Check the HP NetServer to be sure that the memory is properly installed. Insufficient Memory Problem: There is insufficient memory on the adapter for the current configuration. Suggested solution: Check the adapter to be sure that the memory is properly installed. 121