HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 177

Span Arrays check box, 61, 63 spanning arrays, 63 states of physical drives, 55 static electricity, 11, 43, 49, 94 Step A. Plan Your Hardware, 29 Step B. Plan Arrays and Logical Drives, 33 Step C. Prepare the Adapter, 43 Step D. Install the Adapter, 48 Step E. Install Cables and Set SCSI Switches, 50 Step F. Boot HP NetServer Navigator to Launch HP NetRAID Assistant, 52 Step G. Configure Arrays and Logical Drives, 53 Step H. Save Configuration and Initialize, 66 Step I. Decide Which HP NetRAID Drivers You Need, 69 Step J. Use the HP NetServer Navigator CD-ROM to Prepare Disks, 70 Step K. Install NOS and HP NetRAID Drivers, 73 Step L. Install NOS-specific Configuration Utility, 74 Step M. Run Configuration Utilities, 76 Step N. Prepare for Online Capacity Expansion, 81 strain relief clips, 50 stripe size (depth) HP NetRAID, 134 planning, 41 setting, 62 stripe width, 135 striping, 134 T tagged command queuing, 6 termination of SCSI channels, 6, 77 Index tools, 10 U Ultra SCSI channels, 51 Ultra2 SCSI channels, 51 Undo button, 63 undoing hot spares, 60 logical drives, 63, 65 physical drives, 65 upgrading to an HP NetRAID-3Si adapter, 93 UPS and I/O cache policy, 41 utilities configuration, 69 EISA Configuration Utility (ECU), 76, 79 HP NetRAID Assistant, 53, 113 HP NetRAID Config, 115 HP NetRAID Express Tools, 76, 117 installing NOS-specific, 74 latest versions, 70 Setup, 76, 80 V virtual sizing, 62, 129, 134 W Wizard. See HP NetRAID Assistant Wizard Worksheet A, 142 Worksheet B, 143 write policy, 135 planning, 41 setting, 62 169