HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 113
Novell NetWare Server Installation Instructions
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Chapter 9 Managing Servers Over the Network 14. Add to the hosts file the names and IP addresses of servers with adapters to be managed over the network. ◊ In Windows NT systems you will find the hosts file under this pathname where is the path to the Windows files: \system32\drivers\etc\hosts ◊ In Windows 95 systems you will find the hosts file under this pathname where is the path to the Windows files: \system\hosts NOTE HP recommends that all servers and clients that manage HP NetRAID Series adapters over the network have the same hosts file content. This prevents problems in resolving server names and addresses. Finishing Up 15. Read the Release Notes. 16. Restart Windows NT or Windows 95 if you did not do so in Step 12. Novell NetWare Server Installation Instructions For each server operating under Novell NetWare and containing HP NetRAID Series adapters to be managed over the network, install the HP NetRAID Network Utilities as described below: 1. For NetWare 4.11 only, the file rpcbstub.nlm is a read-only file. This file attribute must be changed to read/write before installing the HP NetRAID Network Utilities on a client connected to NetWare through the network. Exit to the DOS prompt and change the file attribute to r/w with the attrib command. The file is located in the \system\ directory of NetWare on the SYS volume. 2. Start the NetWare server and insert the "NetRAID Utilities for NetWare" diskette. 3. At the NetWare console prompt, type load a:\raidinst.nlm 4. Choose Install Package. 105