HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 52
Install Additional Memory
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 5 Installation and Configuration Remove the board extender now, before you connect the Battery Backup Unit. Save the board extender for future use if you move the adapter to another system. Figure 5-1. Remove Board Extender Before Installing the Adapter in HP NetServer LXr Pro Systems Install Additional Memory For the HP NetRAID adapter, cache memory resides in a 4 MB battery-backed 60-ns FPM (Fast-Page Mode) DRAM SIMM. You can install an additional 16 or 32 MB of cache memory, using the D6029A SIMM Upgrade for HP NetRAID. For the HP NetRAID-3Si adapter, cache memory resides in a 16 MB batterybacked 60-ns DO (Extended Data Output) DRAM SIMM. To install additional cache memory: 1. Verify that the Battery Backup Unit is not plugged in on the HP NetRAID or HP NetRAID-3Si adapter. 2. Install the new SIMM according to the instructions supplied with the additional memory. 44