HP LH4r Installation and configuration of the HP NetRAID, NetRAID-1 and NetRAI - Page 67
To assign physical drives to the first array, Add to Array, Reclaim, Accept Array
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 5 Installation and Configuration Figure 5-7. HP NetRAID Assistant Wizard Array Definition Window To assign physical drives to the first array: 1. Select all the Ready physical drives that you want to put into the first array. Clicking on a drive either selects or deselects it. 2. Click the Add to Array button. Physical drives show "A:new" to indicate the drive has been added to a new array, but has not been accepted yet. 3. If you want to remove a physical drive from a new array, select the drive in the new array and click the Reclaim button. 4. When the array is complete, click the Accept Array button. All physical drives assigned to arrays display their array numbers to the right of the SCSI ID. The numbering is zero-based. For example, A0 designates a physical drive assigned to Array 0. 5. The next new array appears. Assign physical drives to it as described above. Be sure to click the Accept Array button to close the array. 59