HP NetServer AA 4000 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 118

Chapter 6 MtcDsl Messages IOPn.MtcDsl status: Unable to initialize the DSL. Severity Error Description The Device Synchronization Layer was unable to initialize due to lack of main memory. This message indicates an operating system resource condition usually related to insufficient memory in the reporting IOP. Related Messages IOPn.MtcDsl status: Unable to allocate callback worker thread. IOPn.MtcDsl status: Provider provName experienced an internal failure. Hardware/Software This message indicates an operating system resource condition caused by insufficient IOP memory. Action • Add more memory to the reporting IOP. • If there is sufficient memory in the IOP, contact your service provider for assistance. IOPn.MtcDsl status: Unable to run provider's callback routine provName. Severity Error Description This message indicates an operating system resource condition usually related to insufficient memory in the reporting IOP. Related Messages IOPn.MtcDsl status: Unable to allocate callback worker thread. Hardware/Software This message usually indicates an operating system resource condition caused by insufficient memory in the reporting IOP. Action • Add more memory to the reporting IOP. • If there is sufficient memory in the IOP, contact your service provider for assistance. IOPn.MtcDsl status: Unable to start a full flush due to an internal software error. Severity Error Description This message occurs only when HP NetServer AA server software has failed a consistency check. Hardware/Software This message indicates an internal HP NetServer AA server software error. Action Report this message to your service provider. If this message occurs, it does not affect an HP NetServer AA server. Any elements (IOPs or CEs) removed as the result of the error can be rebooted safely. Refer to Chapter 9 in HP NetServer AA Solution Administrator's Guide or information on how to reboot an IOP. 108