HP NetServer AA 4000 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 66
the normal initialization and on CEs, the startup process. This may be useful when it is
View all HP NetServer AA 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 2 MIC BIOS Messages Performing internal loopback tests. Severity Informational Description Internal loopback tests will be performed. Action No action is required. Platform initialization failed Severity Error Description The platform module provided by the startup IOP failed to identify or initialize the system. This error is probably due to the wrong CE platform type being selected when the IOP software was installed. Action Reinstall the IOP software on both IOPs, ensuring that the CE platform selected matches the CEs being used. Press or Control-M for MIC setup. Press to bypass initialization. Severity Informational Description Press immediately after the BIOS displays the copyright and version information to start the MIC Setup Utility. Use this utility to change the MIC identity and to run diagnostics. You can also press on the keyboard attached to the HP NetServer AA element to bypass the normal initialization (and on CEs, the startup process). This may be useful when it is necessary to boot off a local device or temporarily circumvent a compatibility problem while a system is reconfigured. Action No action is required. Reboot Required: The system must be rebooted for changes to take effect. Press to bypass automatic reboot or any other key to reboot. Severity Informational Description When the MIC element identity is changed, the system must be rebooted for the firmware to recognize the new setting. In a few cases, it may be desirable to continue system startup as though the MIC were not present rather than to automatically reboot the system. Action Press any key except to reboot. 56