HP NetServer AA 4000 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 63

Chapter 2 MIC BIOS Messages MIC identity unknown Severity Informational Description The MIC element identity (CE1, CE2, IOP1, IOP2) has not been specified in non-volatile memory (or has been reset to the "Unknown" setting). The MIC BIOS automatically places the system in the setup utility so an identity can be selected. Action • Select the appropriate element identity. • Save the setting in non-volatile memory. • Upon exiting the setup utility, reboot the appropriate element to reinitialize the firmware to the new setting. MIC initialization complete Description The MIC initialization performed at system POST (Power-On Self Test) is complete. If this is an IOP, this is the last message displayed by the MIC BIOS. On CEs, control returns to the System BIOS to complete initialization. The MIC later regains control to manage the boot or synchronization process. Action No action is required. MIC internal error: module linen context context data Variables n - the line number Severity Error Description An unexpected hardware or firmware error was detected in the specified module at the specified line. The context data provides additional information about the error. Action This error should not occur during normal operation. Contact your service provider for assistance. 53