HP NetServer AA 4000 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 84
MtcCEX: Could not transition IOP
![]() |
View all HP NetServer AA 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter 4 MtcCEX Messages MtcCEX: Could not transition any IOP MIC port to ACTIVE. Severity Error Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE during CE operating system boot if the HP NetServer AA CE Transport cannot activate a MIC connection to any IOP. The CE operating system boot terminates. Related Messages MtcCEX: Could not transition IOPx MIC port to ACTIVE. Hardware/Software This message is most likely the result of a failure of the CE MIC adapter. Action • If CE boot does not succeed after retrying, replace the CE MIC. • If the problem persists, contact your service provider for assistance. MtcCEX: Could not transition IOPx MIC port to ACTIVE. Variables x - ID of the IOP associated with the MIC adapter port that failed. Severity Error Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE during CE operating system boot when the HP NetServer AA CE Transport cannot activate a MIC adapter port as requested by the IOP during the boot process. The CE transport attempts to continue the boot process. Related Messages MtcCEX: Could not transition any IOP MIC port to ACTIVE. Hardware/Software This message is most likely the result of a failure of the CE MIC adapter or an IOP MIC adapter. Action • If CE boot does not succeed immediately or after retrying, first replace the CE MIC adapter, and then replace the IOP MIC adapter. • If the problem persists, contact your service provider for assistance. 74
![](/manual_guide/products/hewlettpackard-netserver-aa-4000-hp-netserver-aa-6200-solution-release-30-messages-13dd408/84.png)