HP NetServer AA 4000 HP Netserver AA Solution Installation Guide v4.0 SP1 - Page 18
Installation Requirements, Hardware Requirements
View all HP NetServer AA 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation Requirements To complete the Endurance installation, you need to meet the hardware, software, and other requirements described in the following sections: • Hardware Requirements • Software Requirements Hardware Requirements To install the Endurance server, you need the following hardware: Table 1-2 Endurance Server Hardware Requirements Item Notes IOPs The two IOPs must be Pentium® class PCI-bus PCs. Each IOP must have: • A minimum of 256 MB of system memory • The capability of restarting automatically after a power failure. On some systems, you may need to select options for automatic restart in the system Setup utility. • A SCSI system disk for the local copy of the version of the Windows operating system you are using • SCSI Host Based Adapter (HBA) • One SCSI-based or IDE CD-ROM • One SCSI IOP boot device (a physical drive or a logical drive from a hardware RAID set) • At least one SCSI hard disk that meets the requirements listed in the Mirrored Disks Set(s) section of this table • Two Ethernet Adapters that meet the requirements listed in the Ethernet adapter section of this table • Floppy disk drive • Monitor, keyboard, mouse, and video adapter Make sure your IOP systems conform with the requirements specified in the Endurance Release Notes. No IDE devices other than CD-ROMs may be present. 1-6 HP Netserver AA Solution Installation Guide