HP NetServer AA 4000 HP Netserver AA Solution Installation Guide v4.0 SP1 - Page 70
Using Endurance Manager, disable the, Start Endurance Manager and make
View all HP NetServer AA 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Step 5 6 7 8 9 Action Notes Make sure that all computers reboot and that the CEs synchronize. If necessary, start the CE Desktop application on either IOP. Click in the CE Desktop window and login to the CE operating system. Start Endurance Manager and make sure that all Endurance server components transition to active, online, or standby. Using Endurance Manager, disable the active Ethernet connection to make sure that Ethernet access fails over properly, and then re-enable the disabled connection. Alternatively, you can unplug the cable from the active Ethernet connection, replug it in, and ensure that Ethernet access fails over correctly. • Both IOPs must be present for the Endurance server to complete the boot process. Because all I/O devices (including the CE boot disk with the CE operating system) physically reside on the IOPs, the CEs do not begin booting until both IOPs complete their boot process and are available. If the CEs are powered on at the same time as the IOPs, the CEs complete their POST, and then wait for the IOPs to complete their boot process. • After the IOPs complete their boot process, the CEs boot: one CE loads the Windows operating system; then the other CE is synchronized so that both CEs perform all CPU and memory functions in a tightly coupled manner. The CE Desktop application should start automatically. Verify that client connections are not lost. 3-32 HP Netserver AA Solution Installation Guide