HP ProBook 630 Maintenance and Service Guide - Page 41

Solid-state drive

Get HP ProBook 630 PDF manuals and user guides View all HP ProBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

3. If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective sleeve on the antenna connector, as shown in the following illustration. Reverse this procedure to install the WLAN module. Solid-state drive To remove the M.2 solid-state drive, use this procedure and illustration. Table 5-5 Solid-state drive descriptions and part numbers Description 1 TB, M2 2280, PCIe-NVMe, 3 × 4, TLC, SS 512 GB, M2 2280, PCIe 3 × 4, TLC, SS 512 GB, M2 2280, PCIe NVMe, Value 32 GB/512 GB, M2 2280, PCIe 3DX point 256 GB, M2 2280, PCIe-NVMe, TLC, SED 256 GB, M2 2280, PCIe 3 × 4, TLC SS Spare part number L85348-002 L85360-002 L85364-002 L85366-002 M07245-002 L85350-002 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 23). 2. Remove the bottom cover (see Bottom cover on page 23). 3. Remove the battery (see Battery on page 24). Remove the solid-state drive: 1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer. Component replacement procedures 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
3.
If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective sleeve on
the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-5
Solid-state drive descriptions and part numbers
Description
Spare part number
1 TB, M2 2280, PCIe-NVMe, 3 × 4, TLC, SS
L85348-002
512 GB, M2 2280, PCIe 3 × 4, TLC, SS
L85360-002
512 GB, M2 2280, PCIe NVMe, Value
L85364-002
32 GB/512 GB, M2 2280, PCIe 3DX point
L85366-002
256 GB, M2 2280, PCIe-NVMe, TLC, SED
M07245-002
256 GB, M2 2280, PCIe 3 × 4, TLC SS
L85350-002
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
23
).
2.
Remove the bottom cover (see
Bottom cover
on page
23
).
3.
Remove the battery (see
Battery
on page
24
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw
(1)
that secures the drive to the computer.
Component replacement procedures
29