HP ProBook 630 Maintenance and Service Guide - Page 55

To remove the panel, use tweezers to grasp the end of the tape. While, right sides of the panel

Get HP ProBook 630 PDF manuals and user guides View all HP ProBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

9. If you need to remove the hinges from the display enclosure: a. Remove the four Phillips broadhead M2.0 × 2.0 screws (1) from each hinge. b. Remove the two Phillips screws from the back cover (2). c. Remove the hinges from the display (3). The display hinge kits are available as spare part numbers M21140-001 and M24289-001. 10. If you need to remove the display panel: a. The display panel is secured to the display enclosure with tape that is installed under the left and right sides of the panel (1). To remove the panel, use tweezers to grasp the end of the tape. While turning the tweezers, wrap the tape around the tweezers (2) as you continue to pull the tape out from behind the display panel (3). You must pull the tape multiple times before it is completely removed. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
9.
If you need to remove the hinges from the display enclosure:
a.
Remove the four Phillips broadhead M2.0 × 2.0 screws
(1)
from each hinge.
b.
Remove the two Phillips screws from the back cover
(2)
.
c.
Remove the hinges from the display
(3)
.
The display hinge kits are available as spare part numbers M21140-001 and M24289-001.
10.
If you need to remove the display panel:
a.
The display panel is secured to the display enclosure with tape that is installed under the left and
right sides of the panel
(1)
. To remove the panel, use tweezers to grasp the end of the tape. While
turning the tweezers, wrap the tape around the tweezers
(2)
as you continue to pull the tape out
from behind the display panel
(3)
. You must pull the tape multiple times before it is completely
removed.
Component replacement procedures
43