HP ProBook 630 Maintenance and Service Guide - Page 44
Heat sink, Remove the battery see
View all HP ProBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Remove the fan assembly: 1. Lift the display cable from the channels next to the fan (1). 2. Remove the three Phillips M2.0 × 3.0 screws (2) that secure the fan to the computer. 3. Disconnect the fan cable from the system board (3), and then remove the fan from the computer (4). Reverse this procedure to install the fan assembly. Heat sink To remove the heat sink, use these procedures and illustrations. Table 6-2 Heat sink descriptions and part numbers Description Heat sink Spare part number M21149-001 Before removing the heat sink, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 23). 2. Remove the bottom cover (see Bottom cover on page 23) 3. Remove the battery (see Battery on page 24). 4. Remove the fan (see Fan on page 31). Remove the heat sink: 1. In the order indicated on the heat sink, remove the six Phillips M2.0 × 4.0 screws (1) that secure the heat sink to the computer. 32 Chapter 6 Removal and replacement procedures for authorized service provider parts