HP ProBook 630 Maintenance and Service Guide - Page 46
Fingerprint reader board, remove the Phillips M2.0 × 2.5 screw
![]() |
View all HP ProBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Table 6-3 Speaker description and part number Description Speaker Kit Spare part number M21146-001 Before removing the speakers, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 23). 2. Remove the bottom cover (see Bottom cover on page 23). 3. Remove the battery (see Battery on page 24). Remove the speakers: 1. Disconnect the left speaker cable (1), and then remove the Phillips M2.0 × 2.5 screw (2) that secures the left speaker to the computer. 2. Remove the left speaker from the computer (3). 3. Disconnect the right speaker cable (4), remove the Phillips M2.0 × 2.5 screw (5) that secures the left speaker to the computer, and then remove the right speaker from the computer (6). Reverse this procedure to install the speakers. Fingerprint reader board To remove the fingerprint reader board, use this procedure and illustration. Table 6-4 Fingerprint reader board description and part number Description Fingerprint reader board Fingerprint reader board cable Spare part number M21402-001 M27592-001 34 Chapter 6 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-probook-630-maintenance-service-guide-dfaec6f/46.png)