HP ProLiant DL280 Configuring Arrays on HP Smart Array Controllers Reference G - Page 94
Installing the utility
View all HP ProLiant DL280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Field Description SSD Wear Status Indicates the SSD's wear status with one of the following messages: • OK • Not Supported • The SmartSSD Wear Gauge log is full. Wear Gauge parameters are not available. • SSD has less than 5% usage remaining before wearout. • SSD has less than 2% usage remaining before wearout. • SSD has less than an estimated 56 days before it reaches the maximum usage limit for writes (wearout) and should be replaced as soon as possible. • SSD has less than 5% of usage remaining before wearout. It has less than an estimated 56 days before it reaches the maximum usage limit and should be replaced as soon as possible. • SSD has less than 2% of usage remaining before wearout. It has less than an estimated 56 days before it reaches the maximum usage limit and should be replaced as soon as possible. • SSD has reached the maximum rated usage limit for writes (wearout) and should be replaced immediately. Power Cycles Indicates the number of times the SSD has powered on from the powered off state Power On Hours Indicates the number of hours the SSD has been powered on Estimated Life Indicates an estimate of the number of days the SSD has Remaining Based On before SSD Utilization reaches 100%. This field is not Workload To Date displayed when the SSD Utilization is still at 0%. Usage Remaining Indicates the percentage of the SSD that has not worn out. Usage remaining is equal to the difference of 100 and the SSD Utilization percentage. SSD Utilization Indicates the percentage of the SSD that has worn out Installing the utility 1. Browse to the HP Array Configuration Utility website (http://h18004.www1.hp.com/products/servers/proliantstorage/software-management/acumatrix /index.html). 2. Click Download software. 3. Select an OS. 4. Identify the preferred software and version, and then click Download. 5. Save, and then run, the executable file. By default, the software installs at C:\Program Files\HP System Tools\. HP Array Diagnostics and SmartSSD Wear Gauge Utility 94