HP rp3440 HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition - Page 80

Administration > Access Settings > LAN The LAN page (Figure 6-10) enables you to modify the LAN settings. Only a user with configuration access right can use this feature. Figure 6-10 Administration > Access Settings > LAN Page Table 6-11 lists the fields, buttons, and descriptions. Use the following options to modify the LAN settings: Table 6-11 LAN Page Description Fields and Buttons Telnet SSH Description These options are used to enable or disable telnet access to the iLO MP. An industry-standard client-server connectivity protocol that provides a secure remote connection. The iLO MP supports: • SSH2 implementation • Authentication algorithms RSA and DSA • Encryption algorithms 3DES-CBC and AES128-CBC • Integrity algorithms HMAC-SHA1 and MD5 The iLO MP Advanced Pack license is required for this feature. Web SSL You can enable or disable the web SSL access to the iLO MP using the enable or disable option. In order to make an SSL connection, you need to generate a certificate. The certificate status indicates if a certificate has been generated previously. To generate a new certificate, fill in the fields shown and check Generate New Certificate. The system alerts you when the certificate is about to expire or if it has already expired. You will need to generate a new certificate before you can continue. You must reset the iLO MP after you generate a new certificate. Submit Cancel Submits the information. Cancels the action. 80 Using iLO