IBM 8651RM0 Hardware Maintenance Manual - Page 104
Video Port
![]() |
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Video Port: The system board in the server has one SVGA video port. This port is used to attach a video monitor. The video port has a 15-pin analog connector on the back of the server. (Refer to "Input/Output Connectors and Expansion Slots" on page 92 for the location of the connector.) 6 1 11 5 15 10 The following table shows the pin-number assignments for the video connector. Table 5. Video Port Pin-Number Assignments Pin Signal 1 Red 2 Green or monochrome 3 Blue 4 Not connected 5 Ground 6 Ground 7 Ground 8 Ground 9 Not connected 10 Ground 11 Not connected 12 Not connected 13 Horizontal synchronization (Hsync) 14 Vertical synchronization (Vsync) 15 Not connected 96 Netfinity Server HMM
![](/manual_guide/products/ibm-8651rm0-hardware-maintenance-manual-d671fe8/104.png)
Video Port:
The system board in the server has one
SVGA video port.
This port is used to attach a video
monitor.
The video port has a 15-pin analog connector on
the back of the server.
(Refer to “Input/Output Connectors
and Expansion Slots” on page
92 for the location of the
connector.)
1
5
11
15
6
10
The following table shows the pin-number assignments for
the video connector.
Table 5. Video Port Pin-Number Assignments
Pin
Signal
1
Red
2
Green or monochrome
3
Blue
4
Not connected
5
Ground
6
Ground
7
Ground
8
Ground
9
Not connected
10
Ground
11
Not connected
12
Not connected
13
Horizontal synchronization (Hsync)
14
Vertical synchronization (Vsync)
15
Not connected
96
Netfinity Server HMM