IBM 8651RM0 Hardware Maintenance Manual - Page 70

be sure that it is completely and correctly

Get IBM 8651RM0 - Netfinity 7000 - 8651 PDF manuals and user guides
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

a. Remove the screw 5 on the top of the expansion-slot cover 4 . b. Slide the expansion-slot cover out of the server. c. Store these items in a safe place for future use. Attention Expansion-slot covers must be installed on all vacant slots. This maintains the electromagnetic emissions characteristics of the system and ensures proper cooling of system components. 5. Place the adapter, component-side up, on a flat, static-protective surface. 6. Set any jumpers or switches as described by the adapter manufacturer. 7. Refer to the documentation that comes with the adapter for any cabling instructions. It might be easier for you to route any cables before you install the adapter. 8. Install the adapter: a. Carefully grasp the adapter 3 by its top edge or upper corners, and align it with the expansion slot on the system board. Attention Be careful not to damage the EMC gasket when you install the adapter. b. Press the adapter firmly into the expansion slot. The tapered foot of the adapter-retaining bracket must fit into the mating slot in the expansion-slot frame. Attention When you install an adapter in the server, be sure that it is completely and correctly seated in the system-board connector before you apply power. Incomplete insertion might cause damage to the system board or the adapter. c. Align the rounded notch in the retaining bracket with the threaded hole in the expansion-slot frame. The retaining bracket on the adapter fits into the space that was occupied by the expansion-slot cover. d. Insert the expansion-slot screw 5 that you removed earlier into the threaded hole, and push the rounded notch up against the screw. e. Tighten the expansion-slot screw firmly. f. Connect any needed cables to the adapter. 9. Reinstall the adapter-support bracket 2 and tighten the screw 1 . 62 Netfinity Server HMM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
a.
Remove the screw
5
on the top of the
expansion-slot cover
4
.
b.
Slide the expansion-slot cover out of the server.
c.
Store these items in a safe place for future use.
Attention
Expansion-slot covers must be installed on
all vacant slots.
This maintains the
electromagnetic emissions characteristics of
the system and ensures proper cooling of
system components.
5.
Place the adapter, component-side up, on a flat,
static-protective surface.
6.
Set any jumpers or switches as described by the
adapter manufacturer.
7.
Refer to the documentation that comes with the
adapter for any cabling instructions.
It might be
easier for you to route any cables before you install
the adapter.
8.
Install the adapter:
a.
Carefully grasp the adapter
3
by its top edge
or upper corners, and align it with the expansion
slot on the system board.
Attention
Be careful not to damage the EMC gasket
when you install the adapter.
b.
Press the adapter
firmly
into the expansion slot.
The tapered foot of the adapter-retaining bracket
must fit into the mating slot in the expansion-slot
frame.
Attention
When you install an adapter in the server,
be sure that it is completely and correctly
seated in the system-board connector before
you apply power.
Incomplete insertion might
cause damage to the system board or the
adapter.
c.
Align the rounded notch in the retaining bracket
with the threaded hole in the expansion-slot
frame.
The retaining bracket on the adapter fits
into the space that was occupied by the
expansion-slot cover.
d.
Insert the expansion-slot screw
5
that you
removed earlier into the threaded hole, and push
the rounded notch up against the screw.
e.
Tighten the expansion-slot screw firmly.
f.
Connect any needed cables to the adapter.
9.
Reinstall the adapter-support bracket
2
and tighten
the screw
1
.
62
Netfinity Server HMM