IBM 8651RM0 Hardware Maintenance Manual - Page 48
Administrator Password
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
If a user password is set and then forgotten, you can clear the password from memory using a system-board configuration switch. To set a user password in the Setup program: 1. Start the Setup program. 2. Select Set User Password on the Security Menu screen. The Set User Password screen appears. 3. Type the password in the Enter New Password data field. 4. Press Enter. The cursor moves to the Confirm New Password data field. 5. To verify that you typed the new password correctly, type the password in the Confirm New Password data field. If you did not type the correct password, you must reenter the password in the Enter New Password data field. 6. If you typed the correct password, press Enter to save it. The password becomes effective immediately after you save it. Administrator Password: Before you set an administrator password, you might want to first set the drive-startup sequence, as described in "Setting the Drive-Startup Sequence" on page 41. If an administrator password is set and then forgotten, you can clear the password from memory using a system board configuration switch. To set an administrator password in the Setup program: 1. Start the Setup program. 2. Select Set Administrator Password from the Security Menu screen. The Set Administrator Password screen appears. 3. Type a password in the Enter New Password data field. Note To remove an administrator password, press Ctrl+D. 4. Press Enter. The cursor moves to the Confirm New Password data field. 5. To verify that you typed the correct password, type the password in the Confirm New Password data field. If you did not type the correct password, you 40 Netfinity Server HMM