IBM 8651RM0 Hardware Maintenance Manual - Page 69
Adapter Installation
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
If you install a RAID adapter, follow the instructions in the RAID adapter documentation for configuring the adapter. If you install a RAID adapter that comes with a backup battery pack, you must enable the backup battery pack before you can use the RAID adapter. 1 Captive screw 2 Adapter-support panel 3 Adapter 4 Expansion-slot cover 5 Expansion-slot screw Adapter Installation: To install an adapter: 1. Power-off the server and peripheral devices and disconnect all external cables and power cords; then, remove the top cover (see "Cover (Top)" on page 72). 2. Remove the adapter-support panel 2 by loosening the screw 1 and lifting the panel out of the server. 3. Determine which expansion slot you will use for the adapter. Note Check the instructions that come with the adapter for any requirements or restrictions. 4. Remove the expansion-slot cover 4 : IBM Netfinity 7000 - Type 8651 61