IBM 8651RM0 Hardware Maintenance Manual - Page 144
and cage nuts.
![]() |
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
5. Attach the other slide-bracket assembly to the front and rear of the rack. 6. Push the slide-bracket assemblies to the outermost positions on the rack. 7. Tighten all screws to secure both slide-bracket assemblies. If you are using a torque screwdriver, use the following torque setting: 8-11 Nm (70.8-97.0 in/lbs). 8. Attach the cable-management arm to the rear of the rack: a. Position the cable-management arm bracket on the outside of the mounting rail. b. Insert screws (M6 by 16 mm) through the cable-management arm bracket, mounting rail, and cage nuts. Tighten the screws. c. Position the server bracket on the cable-management arm. d. Insert screws through the cable-management arm and the server bracket. Tighten the screws. 136 Netfinity Server HMM
![](/manual_guide/products/ibm-8651rm0-hardware-maintenance-manual-d671fe8/144.png)