IBM 8651RM0 Hardware Maintenance Manual - Page 165
Error Codes
![]() |
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Beep Code 9 Beeps (ROM checksum error) 10 Beeps (Shutdown register read/write error) 11 Beeps (I2C Error) Error Codes Error Code 0002 (Primary boot device not found) 0010 (Cache memory failure, do not enable cache) 0015 (Primary output device not found) 0016 (Primary input device not found) 0041 (EISA ID mismatch for slot) 0042 (ISA configuration contains invalid information) 0043 (EISA invalid configuration for slot) 0044 EISA configuration not assured) 0045 (EISA expansion board not ready in slot) FRU/Action 1. Update BIOS 2. System Board 1. System Board 1. Reseat Processor and Memory Module 2. Check cabling for Information Panel and Advanced Server Management Adapter 3. Advanced Server Management Adapter 4. Front Panel 5. System Board FRU/Action 1. Cables 2. Primary Boot Device 1. Processor Module 2. Processor Board 1. Primary Output Device 1. Primary Input Device 1. Reseat EISA Adapter 2. Run System Configuration Utility program 3. EISA Adapter 1. Reseat ISA Adapter 2. Run System Configuration Utility program 3. ISA Adapter 4. System Board 1. Reseat EISA Adapter 2. Run System Configuration Utility program 1. Reseat EISA Adapter 2. Run System Configuration Utility program 1. Reseat EISA Adapter 2. EISA Adapter 3. System Board IBM Netfinity 7000 - Type 8651 157
![](/manual_guide/products/ibm-8651rm0-hardware-maintenance-manual-d671fe8/165.png)