IBM 8651RM0 Hardware Maintenance Manual - Page 97
Set the Power switch on the power supply
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
4. Remove the filler panel from the power-supply bay and save it and the two screws you removed for future use. 5. Support the power supply 1 by the handle on the back. 6. Slide the power supply into the chassis. Attention When you install a power supply, first, tighten completely the top screw that attaches the power supply to the server; then, tighten the bottom screw. Failure to do so can damage the power supply. 7. Tighten completely the top screw 6 on the power supply; then, tighten the bottom screw 2 . 8. Set the Power switch on the power supply 3 to the On position. 9. Verify that the AC Power light 5 and DC Power light 4 on the power supply are lit, indicating that the power supply is operating correctly. IBM Netfinity 7000 - Type 8651 89